Category Archives: Woodworking

Display Cabinet (IKEA Mod)

Well, the cabinet is about as done as it will get.  I intend to do a few touch ups , but for the most part it is finished.

From IKEA

 

The things planned to store in the cabinet are quite minuscule in number compared to the amount of items displaced by the cabinet.   I should have built was shelving instead.

The cabinet is 50″ wide and nearly 6′ tall and 20″ deep.  It is lit by track lighting and can be dismantled for movement (although this is an utter pain in the ass).

Thanks for looking.

 

Advertisements

Leave a comment

Filed under Uncategorized, Woodworking

48″ Display Case (IKEA Mod)

Starting life as an IKEA all glass display case (I never trusted the design) this project has the distinction of beginning as a five feet wide case for the Icehouse Game club, but word came down near completion that the space was no longer available.  Thus, Thursday’s project became a redesign on Friday.  Saturday I took up hammer and saw and drove on.

Unfortunately, the project turned out to be longer than expected and larger than expected.  The result is no room or time to finish the Martian Long Gun.

Saturday ended with a picture of a promising start.  Things looked like it might be a two day build.

PLAN B - Day 1 Doors and Sides  Unfortunately, Sunday turned out to be primarily revisiting Saturday’s labors due to the groggy mind caused by late night woodworking.  Sunday ended with a bit of progress.  The front surrounding face was made and the boards for the back wall ready for pocket drilling.  The camera refused to focus.

PLAN B - Day 2 (Front Face) (1)

Day 3 and the back is pretty much ready for final gluing and screwing; However, before I can install the panels, I must first glue on a carpet.  I’m using carpet because the pile should cover over any holes placed thru the peg board.  The current carpet is more like the fuzzy part of Velcro than like the short pile rug I had in mind.  I’m visiting a different Home Depot to see what they might have.  I have a 1/4″ black carpet, but originally wanted a red short pile.  Anyways, thanks for looking.

PLAN B - Day 3 (Back Panel)

Well, the carpet was a bust.  I could not find any I liked and I’m not certain the brackets would lay properly since the pile would probably keep it pushed out.  Instead, I went with red velvet which will probably look like dookie if I should ever expose the holes made by the brackets.  Anyways, the panels were completed yesterday and are ready to install, however, the basement is too dirty to install early, so the five panels remain on my living room floor.

Plan B - Day 4 (Red Panel)

(Day 5) I worked worked on the base and needed to add planks to the tops and bottoms of the side pieces so they meet the top of the front facing.  Also, the bottom planks allow me to screw the sides to the base.

Day 7 – I built the top and stained all of the pieces.  The stain matches the floor board color pretty well.  A coat of polyurethane would probably match them up, but I’m not going to use it.  It looks good enough.  I didn’t really sand down the edges as I should, because I didn’t want to risk damaging the prefinished surface as I did in one spot.  I’m skipping the base molding since it really is just one more thing to get damaged or in the way.

Day 8 – The basement was too dirty to do a dry fit, so I just put it together upstairs in its intended place.  Here is the link to the final outcome.

 

Leave a comment

Filed under Uncategorized, Woodworking

Martian Long Gun

Updated (7/25/17) at end of post.

I’ve recently joined the Steampunk Gun Club on Facebook.  They are currently having an “all metal” competition that would have been perfect for my Satchel Gun, but work can not have begun before the contest was announced.

Me being the honest Abe that I am decided to dredge up an older idea and use it.  My style is to use a little bit of all materials available during the Steampunk years (circa 1800s).  Although the original contest idea was an all metal build, they did say it was alright to use wood for stocks and grips.  As I’ve mentioned, my build will include other materials as well; however, they will be primarily used as non-critical elements and accessories.

Here is an idea of what the gun will look like without the intended rifle scope added.

DSCN0590

As you can see, it is still a design in progress.  As an extra twist, the contest states the gun’s trigger must be operational in such a way that it operates light, sound, or some other similar effect.

Anyways, the contest ends in mid-July leaving me with about 4 weeks remaining.

I waited for a pivotal piece that connected the stock to the rifle.  (This is shown in the lower rifle example.)  However, I was disappointed to find they mailed me the wrong part.  I visited the local DIY store (Lowes) and found the potential solution using the smaller but available sized 1″ copper pipe tubing of which the gun is primarily made.  The forked uprights are shifting forks from some motor cycle or other.  I only have three at the moment, but have made an effort twice now to buy the correct size (shaft rod).

Wood will be wrapped around the front barrel shrouds.  Another piece will have circles cut into it and extended back near the shoulder.  An upper and lower rod will protrude from the upper and lower edge of the wood stock allowing leather to be wrapped around the end piece for use as the shoulder rest portion of the rear stock.

Update (7/25/17) – Well, a week and a half remain in the contest (the contest was extended until August 5th).  I need to get my ass in gear.  Here’s a pic of what I have thus  far for the gun.  (The tubes along the edge of the bench.)  Unseen is the handle and shoulder stock.  The wooden portion of the shoulder stock can be seen to the right of the lime green drill.  The circles are cut in the stock.  DSCN0592

Overall, I have things figured out and know how I’m going to make them, but I still have no idea about how to dress up the receiver and how to attach the scope.  Also, I’m not convinced the gun will be strong enough.  A 1/2″ threaded rod will hold the barrel pieces together, but it won’t go any further than the receiver so the handle and shoulder stock will be fairly weak.  Of course, that is where the strength needs to be so a solution is needed and quick!

The scope is mocked up and requires a little more work.  I’m not sure if I like it or not.   The mock up is shown here, but the magnifying glasses are not shown.  The diagram is generally how I envision the scope.  As can be seen, a real scope is hidden within the scope allowing four times (4x) magnification.  To complete the project, I’ll have to remove the scope’s eye piece to put on the smaller bellows.  Also, I will be placing a rod to either side of the scope that will hold everything together and straight.  At the moment, the scope rings will remain mid-center of the scope and be used to mount the scope to the rifle.  The tall, metal, fork “Sights” on the gun make mounting a challenge.  However. the shoulder stock sits quite high so using the scope should be relatively comfortable.  People should not have to stretch their neck to use it.

I made the bellows using Popsicle sticks and black hockey tape.  My plan was to wrap over the tape with black leather, but that seems a bit over designed.  The cloth will add an additional texture to help break up the hardness of the oak.  I have some watch crystals that I’ll be using to cover some of the drilled holes.  Aside from any dust, they should not effect the use of the scope.  The magnifying lenses are just for looks and will prevent the scope from being used if placed in line of sight.

The “eye piece” on the far right will be more like that of my range finder project.  The square box, might be used for some other purpose.

DSCN0593   The following pic shows one of many of the inspiring scope designs.  I like the absurdity of having so many optics on one gun.   If time remains, I might involve a laser and/or flash light.71fw-N77k8L._SL1001_

As always, thanks for looking.

Leave a comment

Filed under Cosplay, LARP, Props, Steampunk, Woodworking

STEAMPUNK SUBMACHINE GUN (SATCHEL GUN)

WORK IN PROGRESS

(Updated 05/08/17)

 Storied Background

“The idea behind the gun was to create a firearm capable of being carried in a small satchel and provide deterring firepower until an escape can be made. During last minute design, the requirement was added for an attachable shoulder stock and bayonet. The order for a bayonet was ignored and the stock was given a design borrowed from a popular carbine of the age.”

Design

I wanted to make something like the guns used by lackies in the movie League of Extraordinary Gentlemen. Also, I wanted something compact so the original idea was to follow the Magpul FMG9 folding sub-machine gun. The prop is designed for display and perhaps light handling during LARPing.

Aside from the removable magazine and folding foregrip, the gun has no other moving parts. I did not want to complicate the design as I always do. I chose to save the complexity for my next projects.

The upper portion of the gun is only one inch wide with the thickest (hand grips) area being only one and a half inches thick.

Sight design proved difficult as a simple, yet interesting, design was needed. In the end, I kept it simple and tossed on a short scope remeniscent of modern firearms modifications.

I took pictures of the work in progress, but not until later in the build.  Here are a few ideas I jotted down to guide myself. As you can see, the stock was quite baffling. PWB M1-07 Notes

I’m looking forward to utilizing what I learned in my next gun project. I want to make a gun that uses a locking lug system such as the Luger pistol or the Pederson rifle. I definitely want it to incorporate moving parts.

Construction

The design has no actual firearm parts using only stock metal and wood from the local DIY store along with a few found items. I used only common hand and power tools. A cordless drill for light work and a proper corded drill for most of the labor. I cheated a bit by using a grinding wheel which speeds things up, but is nothing that cannot be completed manually. In actuallity, the wheel actually caused me to use the hand files more than once to correct some overzelous grinding so going quick is not always the best route.

When building, I constructed all the metal pieces before fitting the wood.

I quickly ran into trouble making the stock both folding and steampunky. In the end, I chose ‘punk over function. The handle is split into two pieces. The upper half is attacked to the reciever while the lower half remains with the ammunition magazine.

In addition, the stock is attached to the magazine handle allowing easy addition or removal. Of course, one loses the use of the stock when reloading. For this reason, the Satchel Gun was issues with a second, stockless magazine allowing the gunner to respond to any close range enemy advancements until the stocked magazine was loaded. The stocked was then swapped with the extra magazine allowing more accurate engaugement with the enemy. Thus, the short magazine was intended for defense until the stocked magazine was avaialble for offensive fire.

At this time, I do not have a short (w/o stock) magazine available. However, since I like the result and the construction is relatively simple, I suspect I will be using the magazine for future builds as well.

A folding foregrip/handle is placed just below the muzzle and theoretically acts as both foregrip and charging handle. However, on this prop, the handle only folds and unfolds. Although, it is sturdy enough to be used.

Well, I had to file off all the paint and some of the corners, but after a generous amount of wax, the handle and magazine fit together nice and snug. This means I should not need to bolt them together as I feared earlier.  The copper tube used for the barrel is nearly lost in the shadows.  It will also be painted black and the shoulder stock will have additional length added.  Trigger, sights, scope and interior parts are also in the works.  

PWB M1-07 (WIP)

Update (05/06/17) follows — I revisited the shoulder stock.  I attempted to ‘punk it up.  I added the foregrip furniture and folding handle.  The furniture is only test pieces.  The actual grips will be oak to match the shoulder stock.  They are only held by rubber bands at the moment, but I like the idea of something more than attaching them with screws.  The folding grip is only held in place by friction at the moment.  I might work out a spring system?  I need to work out the scope/sights on the top of the gun.  ALso, the hand grips need to be added (somehow).

DSCN0518

Update:  the spring idea for the folding handle failed.  I’ve moved onto assembling and installing the interior works.  Since this is a display only, the internals are held in place by a nail head.

 Update:  (Photo follows) Added a sling which required extensive testing.  Glad I did because I don’t want to remake a new stock.  I replaced the copper tube barrel with a piece of black gas pipe.  I is thicker and looks more like a real barrel.  The foregrip is only a mock-up.  The folding handle is down, but blends in  with the background.  Thankfully it does not interfere with the front swivel.  I also worked out the scope and its mount, but have not attached it here.  The scope will be capable of flipping to the side.  However, there will not be any iron sights to use in lieu of the scope.  The trigger and trigger guard are still needed.

DSCN0519

Update (05/08/17) [No pics] — I added a trigger and trigger guard tonight.  I’ve also decided how to attach the grips to the handle.  I want a way to easily separate the mag from the handle, but at the moment the only solution is to screw them together or use some sort of pin.  The only other thing before painting is making and fitting the hand grips and fore grips.

Leave a comment

Filed under Cosplay, LARP, Props, Steampunk, Uncategorized, Woodworking

Gun Rack

I’ve been on somewhat of a buying spree with antique firearms lately.  I’m a low end collector and these are relatively cheap and impractical since ammunition needs to be made from scratch as they are all 1860’s through 1898 in age.  (I wouldn’t be surprised if a few became props in my steampunk projects.)

Here’s the gun rack I’ve needed for quite some time to get my firearms out of the closet/basement.  It is pine with a “gunstock” colored stain which gives it a red hue like cherry wood.  I was trying to match the television stand, but need at least one more coat.  dscn0483I skipped the obligatory black or red felt and went with a black quilted cloth instead which I believe enhances the design.  The lower right pic shows the quilting, but the color is slightly distorted by my Edison bulb lighting.

It is 5 feet by 2 feet in size to accommodate the longer barrels of the period.  It has brass brackets placed closer together to fit short carbines.   I also used peg board for the backboard so I have the option to hang items in various locations If needed. The contact cement used to bond the cloth to the backboard still fills the house.  I threw it together using pocket hole screws (the Kreg system).  Build time was about 12 hours with an intermittent overnight wait for the stain to dry.

I actually cut the wood for a second, identical gun rack, but only had the room to work on one at a time.  The second can wait until I absolutely need it.

Leave a comment

Filed under Woodworking

Gun Cabinet Finished (Sort of)

This is the cabinet portion of the Steampunk heavy machine gun.  I need to work on the gun sights, plumbing, legs/stand, and other details before I take the final photographs.

Steampunk Heavy Machine Gun Cabinet

Here’s the step by step progress:  STEP-BY-STEP  or https://fleetinginterests.wordpress.com/steampunk-heavy-machine-gun-sentry/

Leave a comment

Filed under LARP, Props, Steampunk, Uncategorized, Woodworking

Update

I’ve been working on the Steampunk Machine Gun Sentry project.  I expect to have the gun’s cabinet finished soon.  That is to say, I’ll have all but the stand portion completed.

https://fleetinginterests.wordpress.com/2014/03/29/steampunk-machine-gun-sentry/

Leave a comment

Filed under LARP, Props, Steampunk, Uncategorized, Woodworking