A Warhammer map intended to be printed on parchment or dark colored backgrounds. All art and images are taken from the internet or the Mordheim rules book PDF.
Category Archives: Props
As always, completion of one project leads to a hundred more. While filling the display case, I realized I need a few things to better display some items. I have a few books I bought off of Etsy (made by Mille Cuirs) that I want to display, but I could not find a suitable display stand so I created my own using some oak and a broken 3/8″ thick glass shelf I happen to have laying about. The glass was supposed to be trash, but now that I realized I can cut it, i’ll keep it.
I want to do something with the rear base. I thought of painting it black, but that seems too simple. Perhaps add a tapper to narrow the width?
I have one more book by Mille I want to display and the above look is equally suitable so its display stand will be pretty much the same except smaller.
Updated (7/25/17) at end of post.
I’ve recently joined the Steampunk Gun Club on Facebook. They are currently having an “all metal” competition that would have been perfect for my Satchel Gun, but work can not have begun before the contest was announced.
Me being the honest Abe that I am decided to dredge up an older idea and use it. My style is to use a little bit of all materials available during the Steampunk years (circa 1800s). Although the original contest idea was an all metal build, they did say it was alright to use wood for stocks and grips. As I’ve mentioned, my build will include other materials as well; however, they will be primarily used as non-critical elements and accessories.
Here is an idea of what the gun will look like without the intended rifle scope added.
As you can see, it is still a design in progress. As an extra twist, the contest states the gun’s trigger must be operational in such a way that it operates light, sound, or some other similar effect.
Anyways, the contest ends in mid-July leaving me with about 4 weeks remaining.
I waited for a pivotal piece that connected the stock to the rifle. (This is shown in the lower rifle example.) However, I was disappointed to find they mailed me the wrong part. I visited the local DIY store (Lowes) and found the potential solution using the smaller but available sized 1″ copper pipe tubing of which the gun is primarily made. The forked uprights are shifting forks from some motor cycle or other. I only have three at the moment, but have made an effort twice now to buy the correct size (shaft rod).
Wood will be wrapped around the front barrel shrouds. Another piece will have circles cut into it and extended back near the shoulder. An upper and lower rod will protrude from the upper and lower edge of the wood stock allowing leather to be wrapped around the end piece for use as the shoulder rest portion of the rear stock.
Update (7/25/17) – Well, a week and a half remain in the contest (the contest was extended until August 5th). I need to get my ass in gear. Here’s a pic of what I have thus far for the gun. (The tubes along the edge of the bench.) Unseen is the handle and shoulder stock. The wooden portion of the shoulder stock can be seen to the right of the lime green drill. The circles are cut in the stock.
Overall, I have things figured out and know how I’m going to make them, but I still have no idea about how to dress up the receiver and how to attach the scope. Also, I’m not convinced the gun will be strong enough. A 1/2″ threaded rod will hold the barrel pieces together, but it won’t go any further than the receiver so the handle and shoulder stock will be fairly weak. Of course, that is where the strength needs to be so a solution is needed and quick!
The scope is mocked up and requires a little more work. I’m not sure if I like it or not. The mock up is shown here, but the magnifying glasses are not shown. The diagram is generally how I envision the scope. As can be seen, a real scope is hidden within the scope allowing four times (4x) magnification. To complete the project, I’ll have to remove the scope’s eye piece to put on the smaller bellows. Also, I will be placing a rod to either side of the scope that will hold everything together and straight. At the moment, the scope rings will remain mid-center of the scope and be used to mount the scope to the rifle. The tall, metal, fork “Sights” on the gun make mounting a challenge. However. the shoulder stock sits quite high so using the scope should be relatively comfortable. People should not have to stretch their neck to use it.
I made the bellows using Popsicle sticks and black hockey tape. My plan was to wrap over the tape with black leather, but that seems a bit over designed. The cloth will add an additional texture to help break up the hardness of the oak. I have some watch crystals that I’ll be using to cover some of the drilled holes. Aside from any dust, they should not effect the use of the scope. The magnifying lenses are just for looks and will prevent the scope from being used if placed in line of sight.
The “eye piece” on the far right will be more like that of my range finder project. The square box, might be used for some other purpose.
The following pic shows one of many of the inspiring scope designs. I like the absurdity of having so many optics on one gun. If time remains, I might involve a laser and/or flash light.
As always, thanks for looking.
WORK IN PROGRESS
“The idea behind the gun was to create a firearm capable of being carried in a small satchel and provide deterring firepower until an escape can be made. During last minute design, the requirement was added for an attachable shoulder stock and bayonet. The order for a bayonet was ignored and the stock was given a design borrowed from a popular carbine of the age.”
I wanted to make something like the guns used by lackies in the movie League of Extraordinary Gentlemen. Also, I wanted something compact so the original idea was to follow the Magpul FMG9 folding sub-machine gun. The prop is designed for display and perhaps light handling during LARPing.
Aside from the removable magazine and folding foregrip, the gun has no other moving parts. I did not want to complicate the design as I always do. I chose to save the complexity for my next projects.
The upper portion of the gun is only one inch wide with the thickest (hand grips) area being only one and a half inches thick.
Sight design proved difficult as a simple, yet interesting, design was needed. In the end, I kept it simple and tossed on a short scope remeniscent of modern firearms modifications.
I took pictures of the work in progress, but not until later in the build. Here are a few ideas I jotted down to guide myself. As you can see, the stock was quite baffling.
I’m looking forward to utilizing what I learned in my next gun project. I want to make a gun that uses a locking lug system such as the Luger pistol or the Pederson rifle. I definitely want it to incorporate moving parts.
The design has no actual firearm parts using only stock metal and wood from the local DIY store along with a few found items. I used only common hand and power tools. A cordless drill for light work and a proper corded drill for most of the labor. I cheated a bit by using a grinding wheel which speeds things up, but is nothing that cannot be completed manually. In actuallity, the wheel actually caused me to use the hand files more than once to correct some overzelous grinding so going quick is not always the best route.
When building, I constructed all the metal pieces before fitting the wood.
I quickly ran into trouble making the stock both folding and steampunky. In the end, I chose ‘punk over function. The handle is split into two pieces. The upper half is attacked to the reciever while the lower half remains with the ammunition magazine.
In addition, the stock is attached to the magazine handle allowing easy addition or removal. Of course, one loses the use of the stock when reloading. For this reason, the Satchel Gun was issues with a second, stockless magazine allowing the gunner to respond to any close range enemy advancements until the stocked magazine was loaded. The stocked was then swapped with the extra magazine allowing more accurate engaugement with the enemy. Thus, the short magazine was intended for defense until the stocked magazine was avaialble for offensive fire.
At this time, I do not have a short (w/o stock) magazine available. However, since I like the result and the construction is relatively simple, I suspect I will be using the magazine for future builds as well.
A folding foregrip/handle is placed just below the muzzle and theoretically acts as both foregrip and charging handle. However, on this prop, the handle only folds and unfolds. Although, it is sturdy enough to be used.
Well, I had to file off all the paint and some of the corners, but after a generous amount of wax, the handle and magazine fit together nice and snug. This means I should not need to bolt them together as I feared earlier. The copper tube used for the barrel is nearly lost in the shadows. It will also be painted black and the shoulder stock will have additional length added. Trigger, sights, scope and interior parts are also in the works.
Update (05/06/17) follows — I revisited the shoulder stock. I attempted to ‘punk it up. I added the foregrip furniture and folding handle. The furniture is only test pieces. The actual grips will be oak to match the shoulder stock. They are only held by rubber bands at the moment, but I like the idea of something more than attaching them with screws. The folding grip is only held in place by friction at the moment. I might work out a spring system? I need to work out the scope/sights on the top of the gun. ALso, the hand grips need to be added (somehow).
Update: the spring idea for the folding handle failed. I’ve moved onto assembling and installing the interior works. Since this is a display only, the internals are held in place by a nail head.
Update: (Photo follows) Added a sling which required extensive testing. Glad I did because I don’t want to remake a new stock. I replaced the copper tube barrel with a piece of black gas pipe. I is thicker and looks more like a real barrel. The foregrip is only a mock-up. The folding handle is down, but blends in with the background. Thankfully it does not interfere with the front swivel. I also worked out the scope and its mount, but have not attached it here. The scope will be capable of flipping to the side. However, there will not be any iron sights to use in lieu of the scope. The trigger and trigger guard are still needed.
Update (05/08/17) [No pics] — I added a trigger and trigger guard tonight. I’ve also decided how to attach the grips to the handle. I want a way to easily separate the mag from the handle, but at the moment the only solution is to screw them together or use some sort of pin. The only other thing before painting is making and fitting the hand grips and fore grips.
Here’s my first attempt at tooling soapstone. Overall it came out well. The praying hands are a bit off. It is inspired by Bruce Attley’s Nyarlathotep (Crawling Chaos) statue.
I hope to sculpt a few more (with much better photographs). This took about two months of spare time so doing an Azathoth, Shub-Niggurath, and Yog-Sothoth sculpt seems possible.
Thanks for looking.
This is the cabinet portion of the Steampunk heavy machine gun. I need to work on the gun sights, plumbing, legs/stand, and other details before I take the final photographs.
Here’s the step by step progress: STEP-BY-STEP or https://fleetinginterests.wordpress.com/steampunk-heavy-machine-gun-sentry/
I’ve been working on the Steampunk Machine Gun Sentry project. I expect to have the gun’s cabinet finished soon. That is to say, I’ll have all but the stand portion completed.